Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 299

1 In the Catalog drop-down list, select the catalog that you want to configure.
2 In the Local Name field, specify a name for the selected catalog.
The local name for the catalog should not be same as that reserved for the <catalogname>-
patches folder. If the name is not specified, then the name of the catalog selected in the Catalog
field is used.
3 In the Folder field, specify the eDirectory folder in which the bundles and catalogs are created
and updated.
If no folder is specified, then the catalogs and bundles are created and updated in the /
zlmmirror folder.
4 In the Targets list, click Browse to browse for and select the targets you want to mirror. By
default, all the targets in the selected catalog are mirrored.
To remove a target from the list, select the target, then click Remove.
5 (Conditional) The Category field is displayed only if you have selected the NU type servers of
SLES 10, SLED 10, and OES 2 in the xzlmmirror-Server Settings window. Select the
categories you want to mirror. The available options are Security, Recommended, and Optional.
By default, all the categories are mirrored.
6 In the Bundles pane, specify the bundles you want to mirror by using one of the following
ways:
Click Browse to browse for and select the bundles you want to mirror. By default, all the
bundles in the selected catalog are mirrored.
Specify the bundle name you want to mirror, and click Add to add it to the list.
Mirroring Software 299