Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual page 650

default 1 on a line, indicating the default section's name is "1," which is displayed
immediately after "label" on a line, such as label 1 under which the ramdisk_size
parameter is listed.
10c On the ZENworks server, open the /srv/tftp/dell-dtk.cfg and /srv/tftp/
dell-dtk_maint.cfg files and modify all ramdisk_size parameter values to be
the same as what you obtained in step
11 To ensure that the Dell DTK has been properly updated on the ZENworks server, reboot the
device into PXE and select the Dell DTK (Maintenance Mode) option.
12 To verify that the build number has increased from the number you noted in
bash (#) prompt is displayed, view the content of the /BUILD file:
If the build number has not incremented, either it really isn't an update, or the copy operations
failed.
650 Novell ZENworks 7.2 Linux Management Administration Guide
Step 10b.
Step 5, when the