Configuring System Log Settings - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

ZENworks 7.3 Linux Management with IR1IR2, the default value is 5. For more information,
see "Event Monitoring Troubleshooting
Management Troubleshooting
The maximum number of backup files is 99. The most recent backup file is named
, the second most recent file has the number 2 and so on. When the maximum
message.log.1
file size is reached, the oldest file is deleted.
7 Click OK or Apply.

40.2.2 Configuring System Log Settings

These settings allow you to insert messages into the system file. The path of the system log file is
var/log/messages.
1 In the ZENworks Control Center, click Configuration.
2 In Management Zone Settings, click Local Device Logging.
3 Under System Log, select the Send Message to Local System Log if Severity Is check box to
enable the fields.
4 In the Send Message to Local System Log if Severity Is field, select a value from the drop-down
list.
Select Error to store the messages with an Error severity.
Select Warning and Above to store the messages with a severity of Warning and Error.
Select Information and Above to store the messages with a severity of Information,
Warning, and Error.
5 Click OK or Apply.
Strategies" in the
Guide.
Novell ZENworks 7.3 Linux
Configuring Message Logger Settings 529
central-
/