Specifying An End Receiver - Ricoh fax3900l User Manual

Smt4EN-Ad-F_FM.book Page 13 Monday, September 18, 2000 11:17 AM
I
Specify the End Receiver.
Note
Note You cannot enter the num-
bers of the End Receivers direct-
ly. The numbers must be stored
in Quick Dials, Speed Dials or
Groups in the Transfer Sta-
tion(s).
ReceiveStn.:Press OK
1 [#10_k]
J
Press the {OK} key.
K
Press 0 or 1 to select "Yes" or
"No".
Add Recv. Stn? hi/OK
[Yes]
L
Press the {OK} key.
If you selected "Yes", go back to
step I.
M
Press the {Start} key.
-Sending Broadcast Requests
to Other Manufacturers' Fax
Machines:
Standard Broadcast Request Trans-
missions only work with machines of
the same make that have the Transfer
Station feature. However, if the other
party's fax machine supports SUB
Transmission, you can specify them
as a Transfer Station. (See P.14 "SUB
Code Transmission".)
No

Specifying an End Receiver

You cannot enter the numbers of the
End Receivers directly. Instead, enter
a simple code that describes where
the numbers are stored in the Trans-
fer Station (in Quick Dials, Speed Di-
a l s o r G r o u p s ) . E n d R e c e i v e r
information is then relayed to the
Transfer Station(s), and sent to the
destinations stored in the Transfer
Station(s) memory.
Quick Dial
Enter {#} followed by 2 digits of
the Quick Dial where the End Re-
ceiver is stored. For example, to
choose the number stored in Quick
Dial 01 in the Transfer Station, en-
ter: {#}{0}{1}.
Speed Dial
Enter {#}, {*} followed by the
Speed Dial code (2 digits). For ex-
ample, to choose the num ber
stored in Speed Dial 12 in the
T r a n s f e r S t a t i o n ,
{#}{*}{1}{2}.
Group Dial
Enter {#}, {*}, {*} followed by the
Group number (2 digits). For ex-
ample, to choose the num ber
stored in Group 04 in the Transfer
Station, enter: {#}{*}{*}{0}{4}.
Transfer Request
1
e n t e r :
13