Memory Option - Ricoh fax3900l User Manual

Using LAN FAX

Memory Option

This function requires the optional
Fax Expansion Card.
You can specify how expansion mem-
ory is used when printing with the
LAN FAX function.
If you specify "Fax & Print", 2.6 MB of
memory is reserved for printing.
3
Limitation
If you attempt to make changes
while any document is present in
memory, the message "
mains in mem. Cannot switch
is displayed and the change cannot
be made. Make the change while
remaining memory is 100%.
Note
When a 2 MB Fax Expansion Card
is installed and "Fax & Print" is
specified, 1.4 MB of memory is re-
served for storing files. This reduc-
es available memory below the
amount available when expansion
memory is not installed.
By specifying "Fax & Print", you
can print at Super Fine resolution
(400 x 400 dpi).
A
Make sure the machine is in
standby mode.
B
Press the {User Tools} key.
C
Press 0 or 1 to display "4. Key
Op. Tools".
User Tools Main Menu
4.Key Op. Tools
D
Press the {OK} key.
E
Press {2}{2}{2}{2}, then press the
{OK} key.
56
F
Press 0 or 1 to display "20.
Memory Option".
Key Op. Tools:
20.Memory Option
G
Press the {OK} key.
H
Press 0 or 1 to select "Fax" or
"Fax & Print".
Data re-
Memory Option
"
I
Press the {OK} key.
"Programmed" is displayed on the
screen.
J
Press the {User Tools} key.
The machine returns to standby
mode.
hi
[Fax] Fax&Print
hi
hi/OK