Calling To Request A Message (Polling Reception) - Ricoh fax3900l User Manual

Smt4EN-Ad-F_FM.book Page 10 Monday, September 18, 2000 11:17 AM
Transmission Options
Calling to Request a Message (Polling
Reception)
1
Use this function if you want to poll a
message from another terminal. You
can also poll documents from many
terminals.
There are two types of Polling Recep-
tion:
Secured Polling Reception
If the Polling ID is programmed in
your machine, any messages wait-
ing in the transmitting machine
with the same ID are received. If
the other machine does not have
any messages waiting with the
same Polling ID, any messages that
do not require an ID are received
(Free Polling).
Stored ID Override Polling Reception
You must enter an Override Poll-
ing ID unique to this transmission.
This ID overrides that stored in the
Polling ID. Your machine will re-
ceive any messages waiting in the
transmitting machine with match-
ing ID's. If no ID's match, any mes-
sages that do not require an ID are
received (Free Polling).
Limitation
Polling Reception requires that the
other machine can perform Polling
Transmission.
To receive a message sent by any
Secured Polling Transmission or
Stored ID Override Polling Trans-
mission, it is necessary to specify
the same Polling ID as the sender's.
10
To receive a message sent by Se-
cured Polling Transmission or
Stored ID Override Polling Trans-
mission, the sender must use a ma-
chine of the same manufacturer
that is equipped with the Polling
Reception feature.
Note
The communication fee is charged
to the receiver.
A
Press the {Trans. Option} key.
B
Press 0 or 1 until "6. Polling RX"
is displayed.
Trans. Option
6.Polling RX
C
Press the {OK} key.
D
Press 0 or 1 to select "On".
Polling RX:
[On] Off
E
Press the {OK} key.
F
Press 0 or 1 to select "Default".
Polling RX:
[Default] Override
hi
hi/OK
hi/OK