Reception Time; Two In One; Reverse Order Printing - Ricoh fax3900l User Manual

Smt4EN-Ad-F_FM.book Page 47 Monday, September 18, 2000 11:17 AM

Reception Time

You can have the date and time when
a message was received printed at the
bottom of the received image. This
feature is turned off by default. You
can turn it on with the User Parame-
ters. See P.95 "User Parameters"
(switch 02, bit 2).
Limitation
When a received message is print-
ed on two or more sheets, the date
and time is printed in the last page.
Note
The date and time printed on messages
received using Memory Reception is
the date and time when printed.

Two In One

When two messages of the same size
and direction are received consecu-
tively, they are printed on a single
sheet when you turn this feature on.
This can help you economize on paper.
• Two half-letter L messages are print-
ed side by side on a sheet of letter K.
Limitation
This feature does not work with
messages larger than half-letter K,
or LT L. When LT K size paper is
loaded in the machine, each page
of the received message is output
on a single sheet.
If paper matching the size and di-
rection of a received document is
not available, Two In One is not
possible.
If the sent pages are of different
width, or were sent with different
scan settings, this feature is not
available.
Note
By default, this feature is turned
off. Switch it on with the User Pa-
rameters. See P.95 "User Parame-
ters" (switch 10, bit 1).
This feature uses Memory Reception.

Reverse Order Printing

Normally, received pages are printed
and stacked on the tray in the order
they are received. If you turn this fea-
ture on, the machine starts printing
the message from the last page re-
ceived, meaning that the first page re-
ceived is printed last. By default, this
feature is turned off, but you can turn
it on with the User Parameters. See
P.95 "User Parameters" (switch 10, bit
0).
Note
This feature uses Memory Reception.
Printing Options
4
47