Ricoh fax3900l User Manual page 280

Smt4EN-Ad-F_FM.book Page 90 Monday, September 18, 2000 11:17 AM
Key Operator Settings
Printing the Forwarding Mark
You can have a mark stamped on doc-
uments to indicate that they have
been forwarded.
At the forwarding destination this
can help distinguish between stan-
dard faxes and faxes that have been
forwarded.
Note
You can turn the Forwarding Mark
on or off with the User Parameters.
See P.95 "User Parameters" (switch
02, bit 0). When shipped, this fea-
ture is turned on.
Printing the Specified Sender List
You can check which Specified Send-
ers are registered for a Forwarding
Address.
Follow the steps below to print this
7
list.
A
Make sure that the machine is in
standby mode.
B
Press the {User Tools} key.
C
Press 0 or 1 to display "4. Key
Op. Tools".
User Tools Main Menu
4.Key Op. Tools
D
Press the {OK} key, and then
press {2}{2}{2}{2}.
E
Press the {OK} key.
F
Press 0 or 1 to display "7. For-
warding".
Key Op. Tools:
7.Forwarding
90
G
Press the {OK} key.
H
Press 0 or 1 to display "4. Print
SenderList".
Forwarding:
4.Print SenderListhi
I
Press the {OK} key.
J
Press the {Start} key.
The list is printed.
K
Press the {User Tools} key.
The machine returns to standby
mode.
hi
hi