Setting The Administrator Mode Password - Ricoh fax3900l User Manual

Getting Ready

Setting the Administrator Mode Password

On the [Settings] menu, click [Pass-
word] to display the password settings
1
dialog box. Use this dialog box to
specify a password that controls ac-
cess to Administrator mode.
A
In the dialog box, make the re-
quired password settings.
ST4NE360.tif
A [Current Password]
Type in the password you want
to change from. If this is the first
time you are setting a password
since installing NIC FAX Moni-
tor, leave this text box blank.
B [New Password]
Type in up to eight characters
for the password to which you
want to change. Note that NIC
FAX Monitor distinguishes be-
tween uppercase and lowercase
characters.
C [Confirm New Password]
Re-type the password you spec-
ified into the [New Password] text
box.
28
B
Click [OK] to put your password
settings into effect.
Note
Make sure you keep a separate
record of your password so you
do not forget it. If you do, you
will not be able to access Ad-
ministrator Mode.
Should you forget the pass-
word, contact your service rep-
resentative.
You can operate NIC FAX Mon-
itor in User mode or Adminis-
trator mode. In User mode you
can confirm settings, but you
cannot change them. A pass-
word is required to enter Ad-
ministrator mode. This mode
allows you to change the set-
tings and use all of the NIC FAX
Monitor functions.