Editing Forwarding Settings - Ricoh fax3900l User Manual

NIC FAX Monitor
G
If necessary, specify the dial op-
tions (see P.71 "Dialing with the
Dial Option Key").
If you do not want to specify dial
options, go to step H.
H
Add any destinations you want to
use as specified senders.
Enter the Own Name, Own Fax
Number, or destination E-mail ad-
dress of the specified sender.
Note
To delete a specified sender,
click on its name to select it and
then click [Delete]. After deletion
is complete, click [OK] and go to
5
step J.
A specified sender is a station
that you specify when you only
want documents received from
specific stations to be trans-
ferred. Program specified send-
ers using their Own Name,
Own Fax Number, or E-mail ad-
dress.
You can program 10 specified
senders for every forwarding
station address up to combined
maximum of 50 specified for all
forwarding stations.
[Add] is dimmed if no more
specified senders can be added.
I
Turn Wildcards on or off. Then
click [Add].
Turning on wild cards causes all
faxes that contain the specified
user name in the name, fax number
or E-mail address to be forwarded.
See Chapter 3, "Wild Card" in the
Basic Features manual for details.
76
J
Click [OK] after you are finished
making the settings you want.
The [Specified Sender Details] list
shows specified sender names, and
whether wild cards are turned on
or off.
Note
When using Confidential Trans-
mission or Polling Reception,
enter the dial options, then
press [OK].

Editing Forwarding Settings

Use the procedure below to edit for-
warding settings.
A
Enter Administrator mode (see
P.23 "Entering Administrator
Mode").
B
On the [Details] menu, click [For-
warding].
ST4NE650.tif
C
Click [Edit Options].
ST4NE680.tif