Nic Fax Monitor; Starting Up And Quitting Nic Fax Monitor; Starting Up Nic Fax Monitor; Quitting Nic Fax Monitor - Ricoh fax3900l User Manual

Starting Up and Quitting NIC FAX Monitor

For a brief explanation of NIC FAX Monitor's features, see P.23 "NIC FAX Mon-
itor Settings".

Starting Up NIC FAX Monitor

Note
To use the NIC FAX application on
a Windows 2000 system, you must
be a member of the Administrators
or Power Users group.
The following procedure describes
operation in User Mode.
A
Start up the PC on which NIC
FAX Monitor is already installed.
B
On the [Start] menu, point to [Pro-
grams] and then [NIC FAX applica-
tion]. Next, click [NIC FAX Monitor].
C
Type the IP address or host name
of NIC FAX into the [Host name]
text box, and then click [OK].
Clicking the T button displays a
list of up to five previously con-
nected IP addresses or host names.
ST4NE450.tif
Note
Note that this dialog box does
not appear if you have already
specified an IP address or host
name. Instead, NIC FAX Moni-
tor automatically connects to
the last NIC FAX to which it
was connected.

5. NIC FAX Monitor

Contact your network adminis-
trator if you are unsure of the IP
address or host name to input
here.
D
After a few moments, the initial
NIC FAX Monitor screen shown
here appears.
ST4NE460.tif
Note
Activation of the PC's power
save function can cause the con-
nection with the NIC FAX to be
broken.

Quitting NIC FAX Monitor

From the initial NIC FAX Monitor
screen, click the [Connect] menu's [Ex-
it] command.
Note
Perform the following procedure
to restart NIC FAX Monitor. On
the [Start] menu, point to [Pro-
grams] and then [NIC FAX applica-
tion]. Next, click [NIC FAX Monitor].
63