Wireless Network Setup (Pa2001W/Pa2000W Only) - Kyocera PA2001w Operation Manual

Wireless Network Setup (PA2001w/PA2000w only)

When the wireless network connection settings are configured, it is possible to print or send in a wireless network (wireless
LAN) environment.
Note Before configuring the wireless network settings, connect the computer to the access point of the network or
wireless router.
Configuring the wireless network settings, follow the steps below:
1 Install the printer driver for USB connection on your computer.
Refer to Installing Drivers and Utilities (For installation from the DVD (Product Library)) on page 3-12 or Installing
Drivers and Utilities (For installation from our website) on page 3-20.
2 Configure network connection. There are three ways to configure.
• Configuring Network Connection Using the Push Button (page 3-30)
• Configuring Network Connection Using the Wireless Network Setup Tool (page 3-31)
• Configuring Network Connection by Entering a PIN (page 3-33)
3 Install the printer driver for wireless network connection on your computer.
Refer to Installing Drivers and Utilities (For installation from the DVD (Product Library)) on page 3-12 or Installing
Drivers and Utilities (For installation from our website) on page 3-20.
Install the printer driver for USB connection on your computer
1
Connect the machine with a computer via USB cable when the machine is powered on.
2
Turn on the computer.
3
Install the printer driver for USB connection on your computer.
Refer to Installing Drivers and Utilities (For installation from the DVD (Product Library)) on page 3-12 or Installing
Drivers and Utilities (For installation from our website) on page 3-20.
Configuring Network Connection Using the Push Button
If your router supports WPS, you can configure network connection using the push button.
1
Turn on the computer.
2
Press [Wireless Network] (
The wireless network indicator flashes.
3
Press the push button on the router.
The network between this machine and the router is configured. If the network connection between this machine and
the router is complete, Wireless Network Indicators will light up.
4
Install the printer driver for wireless network connection on your computer.
Refer to Installing Drivers and Utilities (For installation from the DVD (Product Library)) on page 3-12 or Installing
Drivers and Utilities (For installation from our website) on page 3-20.
) on the operation panel of the machine.
3-30
Preparation