Verifying And Managing Dhcp Local Server Configuration - Juniper EX3400 Features Manual

Related
Documentation

Verifying and Managing DHCP Local Server Configuration

Purpose
Action
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Failure to include both port 67 and port 68 as described here results in most DHCP packets
not being accepted.
For complete information about configuring firewall filters in general, see Routing Policies,
Firewall Filters, and Traffic Policers Feature Guide.
Example: Configuring a DHCP Firewall Filter to Protect the Routing Engine
Extended DHCP Local Server Overview on page 22
Extended DHCP Relay Agent Overview on page 46
Understanding Dynamic Firewall Filters
View or clear information about client address bindings and statistics for the extended
DHCP local server.
NOTE: If you delete the DHCP server configuration, DHCP server bindings
might still remain. To ensure that DHCP bindings are removed, issue the
dhcp server binding
To display the address bindings in the client table on the extended DHCP local server:
user@host> show dhcp server binding
To display extended DHCP local server statistics:
user@host> show dhcp server statistics
To clear the binding state of a DHCP client from the client table on the extended DHCP
local server:
user@host> clear dhcp server binding
To clear all extended DHCP local server statistics:
user@host> clear dhcp server statistics
CLI Explorer
command before you delete the DHCP server configuration.
routing-instance customer routing instance
routing-instance customer routing instance
routing-instance customer routing instance
routing-instance customer routing instance
Chapter 2: DHCP Local Server
clear
37