Bgp Configuration Example - 3Com 3032 Configuration Manual

BGP Configuration
Example
Configuring the AS
Confederation Attribute
Operation
Display route flap information
Display the route with inconsistent source
AS
Display peer information
Display routing information distributed
through BGP
Display peer group information
–table regular-express
Display BGP route summary information
Display the configured routing policy
information
Enable BGP packet debugging.
Disable BGP packet debugging
This section describes several different configurations of BGP with a suggested
procedure for each configuration.
As shown in the following diagram, AS 100 is divided into 3 sub-ASs: 1001, 1002,
1003, which are configured with EBGP, confederation EBGP and IBGP.

BGP Configuration Example

Command
display bgp routing-table
flap-information [ {
regular-expression
as-regular-expression } | { acl
acl-number } | { network-address [
mask [ longer-match ] ] } ]
display bgp routing-table
different-origin-as
display bgp peer [ peer-address ]
display bgp routing-table network
display bgp group [ group-name ]
display bgp routing-table
regular-expression
as-regular-expression
display bgp summary
display route-policy policy-name
debugging bgp { all | event | {
keepalive | open | packet | update }
[ receive | send ] [ verbose ] } }
undo debugging bgp { all | event |
keepalive | open | packet | update }
471