Input Interrupts (Direct Mode) - Omron CP1L Operation Manual

Interrupt Functions
6-1-2

Input Interrupts (Direct Mode)

Input Interrupt Bit and
Terminal Allocations
Input Terminal Block of
CPU Units with 10 I/O
Points
Input Terminal Block of
CPU Units with 14 I/O
Points
342
Prevention of Duplicate Processing
Cyclic task
DI
BSET
EI
This function executes an interrupt task when the corresponding input signal
(up or down differentiated) is received.
The following diagrams show the input bits and terminals that are used for the
input interrupt function in each CPU Unit.
The 2 input bits CIO 0.04 to CIO 0.05 can be used for input interrupts.
Upper Terminal Block
(Example: AC Power
Supply Modules)
L1 L2/N COM
Inputs(CIO 0)
The 4 input bits CIO 0.04 to CIO 0.07 can be used for input interrupts.
Upper Terminal Block
(Example: CPU Unit
with AC Power Supply)
L1 L2/N COM 01
00 02
Inputs (CIO 0)
Disables execution of
interrupt programs.
#1234
D0
D10
Enables execution of
interrupt programs.
Input interrupt 1
01 03 05
00 02 04
Input interrupt 0
Input interrupt 1
Input interrupt 3
03 05 07 NC NC
04 06 NC NC
Input interrupt 2
Input interrupt 0
Section 6-1