Omron CP1L Operation Manual page 655

Auxiliary Area Allocations by Address
Address Name
Words Bits
A26 04 Error Counter
Error Flag 0
05 Error Counter
Pulse Output
Flag 0
06 Error Counter
Pulse Output
Acceleration/
Deceleration
Flag 0
07 Error Counter
Alarm Flag 0
15 Inverter Posi-
tioning Output
Value Sign
Flag 0
A28 --- Present Value
and of Pulse Out-
A29 put to Inverter
0, Relative
Value
Function
This flag turns ON when an error
occurs in the error counter for
inverter positioning 0.
This flag is ON while pulses are
being output to the output counter for
inverter positioning 0.
This flag is ON while pulse output to
the output counter for inverter posi-
tioning 0 is accelerating or decelerat-
ing.
This flag turns ON when an alarm
occurs in the error counter for
inverter positioning 0.
This flag is ON when the inverter
positioning 0 output value is positive
and is OFF when it is negative.
These words contain the relative
value of the internal pulse output
when pulses are being output to the
error counter for inverter positioning
0.
Data range: 8000 0000 to 7FFF
FFFF hex (−2,147,483,648 to
2,147,483,647)
Settings Status
after
mode
change
ON: Error ---
counter error
OFF: No error
ON: Pulses ---
being output
OFF: Pulse
output
stopped
ON: Pulse ---
output to the
error counter
is accelerat-
ing or decel-
erating (i.e.,
the fre-
quency is
changing)
OFF: Pulse
output to the
error counter
is constant
ON: Error ---
counter alarm
OFF: No error
counter alarm
ON: Positive ---
value
OFF: Nega-
tive value
--- ---
Appendix D
Status Write Related
at star- timing flags, set-
tup tings
Cleared When ---
pulse out-
put to error
counter is
stopped
and abso-
lute value
of error
counter
present
value is
greater
than or
equal to
error
counter
error
detection
value
Cleared When ---
pulse out-
put to error
counter 0
is started
Cleared When ---
pulse out-
put fre-
quency to
error
counter is
changed
by ACC or
PLS2
instruction
Cleared When ---
pulse out-
put to error
counter is
stopped
and abso-
lute value
of error
counter
present
value is
greater
than or
equal to
error
counter
alarm
detection
value
Cleared When ---
signed out-
put value is
between
0000 0000
and 7FFF
FFFF hex
Cleared Every error ---
counter 0
cycle
621