Auxiliary Area - Omron CP1L Operation Manual

Inverter Positioning

Auxiliary Area

Read Area
Word Bits Function
A20 00 to 15 Lower 4 digits of
present value of
unsigned output
value (output value =
present value of
error counter
counter cycle (s)
gain)
Note The maxi-
A21 00 to 15 Upper 4 digits of
present value of
unsigned output
value (output value =
present value of
error counter
counter cycle (s)
gain)
Note The maxi-
306
■
Inverter Positioning 0
Use one of the following for the inverter frequency command.
Data range
0000 0000 to 8000
0000 hex
(0 to
2,147,483,648)
×
error
×
mum and min-
imum output
values are
applied.
×
error
×
mum and min-
imum output
values are
applied.
Refresh timing
Cleared to zero at following times:
• When power to CPU Unit is turned ON
• At start of operation
• When an error counter error occurs
Updated at following times:
• Cyclically according to error counter
cycle
Section 5-3
Application
examples
This value can be
used when not
using automatic
frequency com-
mand calculations
and instead to con-
vert the output
value provided
here in the user
program for output
to the inverter.
This value is used
when signed data
is not required, i.e.,
when using com-
munications or nor-
mal I/O to specify
the direction.