Omron CP1L Operation Manual page 685

Auxiliary Area Allocations by Address
Addresses Name
Word Bits
A514 All Number of
Power Inter-
ruptions
A515 to All Operation
A517 Start Time
A518 to All Operation
A520 End Time
A523 All Total Power
ON Time
Function
Contains the number of times that
power has been interrupted since the
power was first turned ON. The data
is stored in binary. To reset this
value, overwrite the current value
with 0000.
(This word is not cleared at startup,
but it is cleared when the Memory
Corruption Detected Flag (A395.11)
goes ON.)
The time that operation started as a
result of changing the operating
mode to RUN or MONITOR mode is
stored here in BCD.
A515.00 to A515.07: Seconds (00 to
59)
A515.08 to A515.15: Minutes (00 to
59)
A516.00 to A516.07: Hour (00 to 23)
A516.08 to A516.15: Day of month
(01 to 31)
A517.00 to A517.07: Month (01 to
12)
A517.08 to A517.15: Year (00 to 99)
Note The previous start time is
stored after turning ON the
power supply until operation
is started.
The time that operation stopped as a
result of changing the operating
mode to PROGRAM mode is stored
here in BCD.
A518.00 to A518.07: Seconds (00 to
59)
A518.08 to A518.15: Minutes (01 to
59)
A519.00 to A519.07: Hour (00 to 23)
A519.08 to A519.15: Day of month
(01 to 31)
A520.00 to A520.07: Month (01 to
12)
A520.08 to A520.15: Year (00 to 99)
Note If an error occurs in operation,
the time of the error will be
stored. If the operating mode
is then changed to PRO-
GRAM mode, the time that
PROGRAM mode was
entered will be stored.
Contains the total time that the PLC
has been ON in 10-hour units. The
data is stored in binary and it is
updated every 10 hours. To reset this
value, overwrite the current value
with 0000.
(This word is not cleared at startup,
but it is cleared to 0000 when the
Memory Corruption Detected Flag
(A395.11) goes ON.)
Settings Status
after
mode
change
0000 to FFFF Retained Retained Refresh-
hexadecimal
See at left. Retained Retained See at
See at left. Retained Retained See at
0000 to FFFF Retained Retained ---
hexadecimal
Appendix D
Status at Write Related
startup timing Flags,
Settings
A395.11
ed when
power is
turned
ON.
---
left.
---
left.
---
651