Table of Contents
Advertisement
7. Troubleshooting
• Align the paper and reload it in the paper tray. Loading paper over the limit line in the tray may result
in a paper jam.
• p.44 "Loading Paper"
• p.160 "Nozzle Check"
• p.218 "Removing Paper Jammed in Tray 1"
• p.220 "Removing Paper Jammed in Tray 2/Tray 3 (optional)"
7
• p.222 "Removing Paper Jammed in the Rear Unit (optional)"
• p.223 "Removing Paper Jammed in the Multi Bypass Tray (optional)"
• p.230 "Removing Paper Jammed around the Guide Board"
• p.234 "Removing Paper Jammed in the Duplex Unit"
• p.237 "If You Cannot Remove Jammed Paper"
Removing Paper Jammed around the Guide Board
Follow the procedure below to remove paper jammed around the guide board.
• If the bypass tray is attached to the printer, switch the printer off and detach the duplex unit.
1.
Pressing the catches on both side of the duplex unit, remove the unit.
Detach the duplex unit completely so you can see the guide board in the recess.
230
BPR122S
Advertisement
Table of Contents
Troubleshooting
