Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 89

Guitar
Maximum
0-100. This sets the maximum amount of force, even with modulation.
Velocity
Velocity
0-100. This models the velocity of the "slap" across the string, which affects the
amount of high frequencies in the sound.
Contact Time
0-100. This models the amount of time that the pick is in contact with the string.
Low settings emphasize lower frequencies, and high settings emphasize high
frequencies.
Vel. Mod. (Velocity Modulation)
+/-100. This allows you to modulate the contact time via velocity. A velocity of 127
will add or subtract the specified amount to the setting on the Contact Time knob.
Slap Noise
These controls allow you to adjust the level and timbre of the sharp "slap" sound.
Noise
0-100. This adjusts the level of the slap noise.
Cutoff
0-100. This adjusts the cutoff frequency of a filter dedicated to the slap noise.
Vel. Mod. (Velocity Modulation)
0-100. This allows you to modulate the cutoff frequency of the noise via velocity. A
velocity of 127 will add the specified amount to the setting on the Level knob.
Resonance
0-100. This adjusts the resonance of a filter dedicated to the slap noise.
Vibrato
Frequency
0.0-20.0 Hz. This controls the initial speed of the vibrato.
Frequency Mod
List of Modulation Sources. This sets the modulation source for controlling the
vibrato frequency. For a complete list, please see "Modulation Sources" on page 2.
OASYS PCI
Slap Bass
81