Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 571

Phasers
LFO Shape
Frequency
0.00-20.00Hz. This controls the speed of the LFO.
Frequency Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO frequency. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-20.00Hz. This sets the amount by which the mod source affects the LFO
frequency.
Output
Mode
Mono, Stereo. This controls whether the effect output is mono or simulated stereo.
When this is set to Mono, the output is in mono.
When this is set to Stereo, the output is simulated stereo, with the right effect
output inverted. Note that this simulated stereo effect is not mono-compatible.
Wet/Dry
Dry, 1:99-99:1, Wet. This sets the balance between the effect and the dry signal.
Wet/Dry Mod
List of Modulation Sources. This sets the modulation source for controlling the
wet/dry mix. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the wet/dry mix.
OASYS PCI
LFO Shape = 0 to +100 LFO Shape = 0 to -100
Sine Waveform
Phaser
563