St Auto Wah - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

St Auto Wah

St Auto Wah
This is a stereo-input, stereo-output wah filter, which can be swept either by an
envelope follower or by a MIDI controller.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
St.Wah/Auto Wah
L Cutoff Bottom
0-100. This sets the frequency of the left-channel wah when the modulation is at its
minimum value.
L Cutoff Top
0-100. This sets the frequency of the left-channel wah when the modulation is at its
maximum value.
R Cutoff Bottom
0-100. This sets the frequency of the right-channel wah when the modulation is at
its minimum value.
R Cutoff Top
0-100. This sets the frequency of the right-channel wah when the modulation is at
its maximum value.
Sweep Mode
Auto, Mod Source. This determines how the wah will be controlled.
Auto. The wah will be controlled by the envelope follower.
Mod Source. The wah will be controlled directly from the MIDI mod source.
Mod Source
List of Modulation Sources. This sets the modulation source for controlling the
wah sweep, when Sweep Mode is set to Mod Source. For a complete list of sources,
please see "Modulation Sources" on page 2.
Mod Response
0-100. This sets the rate at which the wah frequency changes in response to the
modulator.
440
Filters
OASYS PCI