St Bi-Phase Chr - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

St Bi-Phase Chr

St Bi-Phase Chr
This stereo-in, stereo-out chorus effect adds two different LFOs together. You can
set the Frequency and Depth parameters for each LFO individually. Depending on
the setting of these LFOs, very complex waveforms will create an analog-type,
unstable modulated sound.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Delay
Left
0.0-50.0ms. This sets the delay time for the left channel, in milliseconds.
Right
0.0-50.0ms. This sets the delay time for the right channel, in milliseconds.
Stereo Bi-Phase Mod
LFO 1 Depth
0-100. This controls the depth of LFO 1's pitch modulation.
LFO 2 Depth
0-100. This controls the depth of LFO 2's pitch modulation.
Feedback
+/-100. This sets the feedback amount of the chorus. Increasing the feedback will
change the chorus into a flanger.
Damping
0-100. This controls the high-frequency damping in the feedback path.
Depth Modulation
Mod Source
List of Modulation Sources. This sets the modulation source for controlling the
LFO depth. For a complete list, please see "Modulation Sources" on page 2.
LFO 1 Amt
+/-100. This sets the amount by which the mod source affects LFO 1's depth.
260
Chorus
OASYS PCI