Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 532

Shimmer
Shape
+/-100. This adjusts the shape of the LFO waveform. Positive values shape the
curve so that it spends more time in the "up" part of the cycle, and negative values
make it spend more time in the "down" part of the cycle, as shown below.
LFO Shape
Phase
+/-100. This adjusts the difference between the phases of the left and right LFOs.
Frequency
0.00-20.00Hz. This sets the frequency of the LFOs.
Env Amount
+/-20.00Hz. This controls the amount by which the envelope follower will
modulate the LFO frequency.
Envelope
Envelope Select
L/R Mix, L Only, R Only. This selects the input which will drive the envelope
follower.
Sens
0-100. This sets the input sensitivity of the envelope follower.
Shape
+/-100. Sets the curve of the envelope follower, as shown below.
524
LFO Shape = 0 to +100 LFO Shape = 0 to -100
Sine Waveform
Pan & Tremolo
OASYS PCI