St Dynamic Dly
High Cut
0-100. This filter cuts the delay's high frequencies. Use this to make the delay sound
warmer, like a tape delay.
Low Cut
0-100. This filter cuts the delay's low frequencies. Use this to make the delay sound
thinner.
Spread
+/-100. This controls the width of the stereo image. Negative values will flip the
stereo placement.
Output
Wet/Dry
Dry, 1:99-99:1, Wet. This sets the balance between the effect and the dry signal.
Wet/Dry Mod
List of Modulation Sources. This sets the modulation source for controlling the
wet/dry mix. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the wet/dry mix.
346
Delay
OASYS PCI