Tempo Phaser - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Tempo Phaser

Tempo Phaser
This is a mono-in, mono-out phaser with a complex, MIDI-syncable tempo LFO.
Try modulating the LFO parameters, such as shape and smoothing, in real time.
For detailed instructions on working with MIDI-synced LFOs, see "MIDI Tempo
LFOs" on page 5.
Input
Source
Left, L + R. This is a mono-in, mono-out effect. Stereo signals are preserved in the
dry mix at the output, but the effect itself has only a single, mono input.
When this is set to Left, only the left channel will be routed into the effect.
When this is set to L + R, the left and right channels will be summed together, and
then routed into the effect.
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Phaser
Center
0-100. This sets the center frequency of the phaser.
Depth
0-100. This controls the amount of LFO modulation of the center frequency.
Resonance
+/-100. This sets the amount of resonance in the phaser effect. Higher resonance
settings create a more extreme sound.
Damping
0-100. This controls the amount of high frequency damping in the phaser
resonance.
LFO
Waveform
Waveform
Triangle, Sine, Saw Up, Saw Down, Square, Sample & Hold. This selects the
waveform of the LFO.
584
Phasers
OASYS PCI