Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 367

Distortion
Gain
+/-18.1dB. This sets the gain of the high EQ band.
Wah
Wah
Off, On. This sets the initial state of the wah effect.
On/Off Source
List of Modulation Sources. This sets the modulation source for controlling the
wah on/off. For a complete list, please see "Modulation Sources" on page 2.
On/Off SW
Momentary, Toggle. This determines the behavior of the on/off switch.
Momentary. The switch changes the wah state only while the switch is on.
Toggle. The switch turns the wah on and off alternately.
Wah Source
List of Modulation Sources. This sets the modulation source for controlling the
wah sweep. For a complete list, please see "Modulation Sources" on page 2.
Sweep Range
0-100. This sets the amount of affect the mod source has on the wah frequency.
Output
Wet/Dry
Dry, 1:99-99:1, Wet. This sets the balance between the effect and the dry signal.
Wet/Dry Mod
List of Modulation Sources. This sets the modulation source for controlling the
wet/dry mix. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the wet/dry mix.
OASYS PCI
Hyper-Gain Wah
359