Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 305

Compressor & Gate
Threshold
-40.0 to 0.0dB. This determines the input level at which the compressor will start to
work. Input levels above the threshold will be compressed, and input levels below
the threshold will not be compressed.
Attack
1-100ms. This determines how quickly the compressor will take affect after the
signal crosses above the threshold.
Release
50-4000ms. This controls how quickly the compressor will stop reducing volume
level after the signal falls below the threshold.
Gain
0-24dB. This allows you to boost the gain after the compressor. In general, try to set
the gain to match the maximum level shown on the gain reduction meter. Setting
this too high can cause clipping on the output.
Gain Reduction meter
This meter shows the amount of gain reduction caused by the compressor.
Output meter
This meter shows the output level of the compressor.
OASYS PCI
St Compressor
297