Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 341

Delay
Feedback Modulation
Feedback Mod
List of Modulation Sources. This sets the modulation source for controlling the
delay feedback levels. For a complete list, please see "Modulation Sources" on
page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the feedback level.
Output
Wet/Dry
Dry, 1:99-99:1, Wet. This sets the balance between the effect and the dry signal.
Wet/Dry Mod
List of Modulation Sources. This sets the modulation source for controlling the
wet/dry mix. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the wet/dry mix.
Delay
Smoothing
0.0-100.0. This determines how long it takes for the delay time to respond to tempo
changes and MIDI controller modulation. 50.0 works well in most cases. Lower
settings will mean that the delay times will change very quickly, but may also cause
clicking. Higher settings will make the delays slide very slowly to their new values,
which can create interesting special effects.
OASYS PCI
Midi Delay
333