Modulations
Mod Amount
+/-100. This sets the amount by which the mod source affects the filter LFO depth.
LFO
Waveform
Triangle, Sine. This selects the waveform for the LFO.
Shape
+/-100. This adjusts the shape of the LFO waveform, from logarithmic to linear to
exponential. Positive values shape the waveform so that it spends more time in the
"up" part of the cycle, and negative values make it spend more time in the "down"
part of the cycle, as shown below.
LFO Shape
Freq
0.00-20.00Hz. This controls the speed of the LFO.
Freq Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO frequency. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-20.00Hz. This sets the amount by which the mod source affects the LFO
frequency.
Output
Wet/Dry
Dry, 1:99-99:1, Wet. This sets the balance between the effect and the dry signal.
OASYS PCI
LFO Shape = 0 to +100
LFO Shape = 0 to -100
Sine Waveform
Vibrato
501