Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 362

St Multitap Dly
Delay 1
0.0-680.0ms. This sets the delay time for the first tap, in milliseconds.
Level 1
0-100. This sets the output level for the first tap.
Delay 2
0.0-680.0ms. This sets the delay time for the second tap, in milliseconds.
Level 2
0-100. This sets the output level for the second tap.
Low Cut
0-100. This filter cuts the delay's low frequencies. Use this to make the delay sound
thinner.
High Cut
0-100. This filter cuts the delay's high frequencies. Use this to make the delay sound
warmer, like a tape delay.
Feedback
Feedback
+/-100. This adjusts the amount of feedback into the delay line. Negative values
invert the phase of the feedback.
Feedback Mod
List of Modulation Sources. This sets the modulation source for controlling the
delay feedback level. For a complete list, please see "Modulation Sources" on
page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the feedback level.
Spread
Spread
+/-100. This controls the width of the stereo image. Negative values will flip the
stereo placement.
Spread Mod
List of Modulation Sources. This sets the modulation source for controlling the
stereo spread. For a complete list, please see "Modulation Sources" on page 2.
354
Delay
OASYS PCI