St Dynamic Dly - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

St Dynamic Dly

St Dynamic Dly
The output level of this stereo delay is controlled by the input signal level. You can
use this as a ducking delay, so that delay is only heard when you play softly (or
pause after playing a phrase), or as a gated delay, so that the delay is only heard
when you are playing loudly.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Level Mod
List of Modulation Sources. This sets the modulation source for controlling the
input level, for "splashed" delays. For a complete list, please see "Modulation
Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the input level.
Control
Envelope Select
L/R Mix, L Only, R Only. The dynamics section is controlled by the level of the
input signal. The Envelope Select determines whether the dynamics will be
controlled by the left input only, the right input only, or by the combination of the
left and right signals.
Polarity
+, -. This determines whether the dynamics will act as a ducker, or as a gate.
+. The dynamics will act as a gate. When the Polarity is positive, delay will be
heard when the input signal level exceeds the Threshold value.
-. The dynamics will act as a ducker. When the Polarity is negative, delay will be
heard when the input signal level is lower than the Threshold value.
Threshold
0-100. This sets the threshold for the dynamics.
Attack
0-100. This sets the time that it takes for the gate to open, or for the ducker to close.
344
Delay
OASYS PCI