Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 44

KB-303
Envelope amount affect on cutoff frequency
Decay
0-100. This sets the decay time of the envelope, which controls how long it takes the
envelope to fall to the minimum level.
Accent
0-100. This sets the intensity of the Accent effect, which is triggered by the Accent
Source modulator, as set below. The Accent increases both the volume and the Env
Amt.
Volume
+12 to -123.9dB, -INF. This is the output volume for the Patch.
IMPORTANT: The output volume provides up to 12dB in gain, so that you can get
your signals as hot as possible. However, if filter resonance is high, settings above
0dB may cause clipping.
Custom MIDI Mods
We added a few custom modifications to this pre-MIDI tone generator.
Accent
Accent Src
List of Modulation Sources. This sets the modulation source for triggering the
Accent. In general, this should be set to Velocity. For a complete list, please see
"Modulation Sources" on page 2.
Threshold
0-100. This sets the mod level at which the accent is triggered. If this is set high,
then only a fairly high mod amount will trigger the Accent.
Slide
This controls the portamento, or glide, for the oscillator pitch. Slide can be turned
on and off by a modulation source.
36
+100
0
Analog Synths
OASYS PCI