Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 205

Percussion
Depth
0-100. The Depth control changes in meaning according to the Type selection. With
Saw, Square, Triangle, Random, and Envelope, the Depth sets the amount of pitch
modulation. With Noise EQ, the Depth sets the volume of the noise.
Noise Color
This section controls the timbre of the noise when the Type is set to Noise EG. It also
affects the sample-and-hold LFO when the Oscillator Pitch Mod Type is set to
Random.
Cutoff
0-100. This controls the cutoff frequency of a highpass filter dedicated to the noise
generator.
Resonance
0-100. This controls the resonance of the highpass filter.
Amplifier
Decay
0-100. This sets the decay time of the amplitude envelope. Higher settings mean a
longer decay time.
Bass Boost
0-100. This increases the bass frequencies in the output signal.
Level
0-100. This sets the overall volume level of the synth.
Trigger 1 (switches 1-16)
On, Off. These sixteen switches control the step sequencer for Percussion Synth 1.
Each switch represents one sixteenth note. If the switch is on, the synth will be
triggered on that step; if it is off, the synth will not be triggered.
Trigger 2 (switches 1-16)
On, Off. These sixteen switches control the step sequencer for Percussion Synth 2.
Each switch represents one sixteenth note. If the switch is on, the synth will be
triggered on that step; if it is off, the synth will not be triggered.
Accent (switches 1-16)
On, Off. These sixteen switches control the step sequencer's accent function. Each
switch represents one sixteenth note. Accent increases the synths' output levels for
the given step. If the switch is on, synths triggered on that step will be accented; if it
is off, synths will not be accented.
OASYS PCI
Beat Box
197