Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 599

Phasers
Stereo Tremolo
Shape
+/-100. This adjusts the shape of the tremolo's LFO waveform, from logarithmic to
linear to exponential. Positive values shape the waveform so that it spends more
time in the "up" part of the cycle, and negative values make it spend more time in
the "down" part of the cycle, as shown below.
LFO Shape
Phase Offset
+/-180. This controls the phase difference between the phaser and tremolo LFOs.
L/R Phase
+/-180. This sets the phase difference between the LFOs for the right and left
channels, for the tremolo only. Off-setting the phase between the two enhances the
stereo effect.
Depth
0-100. This controls the amount of LFO modulation for the tremolo.
Depth Mod
List of Modulation Sources. This sets the source for controlling the tremolo
modulation depth. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the tremolo depth.
Output
Wet/Dry
Dry, 1:99-99:1, Wet. This sets the balance between the effect and the dry signal.
OASYS PCI
LFO Shape = 0 to +100 LFO Shape = 0 to -100
Sine Waveform
Tremolo Phaser
591