Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 590

St TempoPhaser
When using the LFO with tempo, the L/R Phase also creates a rhythmic offset
between the left and right channels. For instance, a 1/4 note LFO with an L/R
Phase of +180 creates alternating stereo 8th notes.
LFO Phase
Phase Reset
List of Modulation Sources. This sets the MIDI controller which will reset the
LFO's phase to the Initial Phase point. You can use this to trigger the LFO from a
MIDI sequencer, so that it always starts at the same point. This is especially useful
in conjunction with MIDI Tempo synchronization. For a complete list of mod
sources, please see "Modulation Sources" on page 2.
To make sure that the LFO's phase is correct when working with a sequencer, it's
best to include the phase reset controller every few bars in the sequence, so that no
matter where you start playback, the LFO will be reset appropriately.
Frequency
The controls in the Frequency section only apply when the LFO Control is set to
Frequency Knob.
Frequency
0.00-20.00Hz. This controls the speed of the LFO when the LFO Control is set to
Frequency Knob.
Frequency Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO speed. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-20.00Hz. This sets the amount by which the mod source affects the LFO speed.
582
0° +90° +180°
–180° 0°
–90°
Phasers
OASYS PCI