Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 73

Analog Synths
AR Envelope
Amp Env
ADSR, AR. The Amp Env switch determines whether the amplifier will use the
simple Amp AR envelope, or the more complex Amp ADSR envelope. Switching to
the AR envelope allows you to use the ADSR envelope as a poly mod source, and
adjust it as desired without affecting the output volume.
Release
On, Off. This enables the release segments of the ADSR envelopes. If this is turned
off, the envelopes will fall to zero immediately on note off.
Volume
+12 to -123.9dB, -INF. This is the output volume for the Patch.
This control has extra smoothing on the DSP, to ensure zipper-free modulation. If
you want to modulate the volume instantaneously via velocity, use the Vel Sens
control instead.
IMPORTANT: The output volume provides up to 12dB in gain, so that you can get
your signals as hot as possible. However, if filter resonance is high, settings above
0dB may cause clipping.
Vel Sens (Velocity Sensitivity)
0-100. This sets the sensitivity of output volume to velocity. A velocity of 127 will
always result in the maximum output level, as set by the Volume control; increasing
the Vel Sens will decrease the output volume for low velocities.
OASYS PCI
Attack time Release time
Pro Synth Mod
65