Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 232

Tenor Sax
Breath Noise
Gain
0.0-100.0. This is the maximum breath level, scaled by the Breath Pressure section's
Input and Input Mod parameters.
Frequency
0-8000Hz. The tone of the breath noise is shaped by a bandpass filter, and this
controls the center frequency of that filter.
Width
0.0-100.0. This controls the bandwidth of the filter. At 0, the filter will be very
resonant.
Reed
Onset
0.00-100.00. Onset controls the gain through the mouthpiece.
Embouchure
0.00-100.00. The embouchure is the way that the lips are pursed; it affects the tone
of the reed.
Damping
0.00-100.00. This controls the brightness of the reed.
Nonlinear
0.00-100.00. The Nonlinear parameter adjusts the feedback within the reed; higher
values make the reed more unstable.
Reflection
+/-100.0. This is the degree of coupling between the reed and the bore, which
controls how much the two parts of the instrument interact.
Growl
Instability
0-100. This adds instability to the breath signal, modeling the breath and reed
technique of the player.
Growl Source
List of Modulation Sources. This sets the modulation source for controlling the
instability, or growl. For a complete list, please see "Modulation Sources" on
page 2.
224
Waveguide
OASYS PCI