Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 284

St Step Chor 2
L/R Phase
+/-180. This sets the phase difference between the LFOs for the right and left
channels. Off-setting the phase between the two, as shown above, enhances the
stereo effect.
Level
0-100. This sets the output level for the low band chorus.
Depth Modulation
Modulate
High Band, Low Band, Both. This selects whether depth modulation affects just
the high band chorus, just the low band chorus, or both bands at once.
Depth Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO depth. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the LFO depth.
Frequency Modulation
Modulate
High Band, Low Band, Both. This selects whether frequency modulation affects
just the high band chorus, just the low band chorus, or both bands at once.
Frequency Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO speed. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the LFO speed.
Output
Wet/Dry
Dry, 1:99-99:1, Wet. This sets the balance between the effect and the dry signal.
Wet/Dry Mod
List of Modulation Sources. This sets the modulation source for controlling the
wet/dry mix. For a complete list, please see "Modulation Sources" on page 2.
Mod Amount
+/-100. This sets the amount by which the mod source affects the wet/dry mix.
276
Chorus
OASYS PCI