Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 237

Waveguide
You can use the highpass to create muted effects.
Resonance
0.00-100.00. This controls the resonance of the highpass filter. Resonance
emphasizes the frequencies around the cutoff frequency. At 0, there is no emphasis,
and frequencies beyond the cutoff will simply diminish smoothly. At very high
settings, the resonance can be heard as a separate, whistling pitch. At medium
settings, the resonance will alter the timbre of the filter, but will not usually be
heard as a separate pitch.
Lowpass
0.00-100.00. This controls the cutoff frequency of the lowpass filter. Frequencies
above the cutoff are attenuated, and frequencies below the cutoff are passed
through unchanged.
Resonance
0.00-100.00. This controls the resonance of the lowpass filter. Resonance emphasizes
the frequencies around the cutoff frequency. At 0, there is no emphasis, and
frequencies beyond the cutoff will simply diminish smoothly. At very high settings,
the resonance can be heard as a separate, whistling pitch. At medium settings, the
resonance will alter the timbre of the filter, but will not usually be heard as a
separate pitch.
Pitch Controllers
You can bend the pitch of the trombone smoothly, as when moving the slide, or
make it jump up and down in a "rip" which follows the harmonic series.
Octave Rip
List of Modulation Sources. This sets the modulation source for controlling the
octave rip. For a complete list, please see "Modulation Sources" on page 2.
Slide
List of Modulation Sources. This sets the modulation source for creating a smooth
pitch bend, like moving the slide. For a complete list, please see "Modulation
Sources" on page 2.
Vibrato Rate
Frequency
0.00-10.00 Hz. This controls the initial speed of the LFO.
Frequency Mod
List of Modulation Sources. This sets the modulation source for controlling the
LFO frequency. For a complete list, please see "Modulation Sources" on page 2.
OASYS PCI
Trombone
229