Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 630

O-Verb XL
Diffusion 1. The delay will use the signal from the first diffuser, creating slightly
diffuse, softer-sounding delays (depending on the setting of the diffuser itself).
Diffusion 1&2. The delay will use the signal after it has passed through both
diffusers, creating more diffuse, almost fluffy-sounding delays, depending on the
settings of the diffusers.
Delay Time (1-2)
0.0-8000.0ms. This sets the delay time for the tap, in milliseconds.
This parameter only applies when the Delay Mode is set to Delay Time. When
Delay Mode is set to Tempo, this has no effect.
Note Value (1-2)
1/32, 1/32 dotted, 1/16, 1/16 dotted, 1/16 triplet, 1/8, 1/8 dotted, 1/8 triplet, 1/4, 1/4
dotted, 1/4 triplet, 1/2, 1/2 dotted, 1/2 triplet, 1 bar, 2 bars. This sets the length of
the delay, in note value.
This parameter only applies when the Delay Mode is set to Tempo. When Delay
Mode is set to Time, the Note Value has no effect.
Fine Adjust (1-2)
+/-10%. This adjusts the delay time as a percentage of the time set with either the
Time or Note Value parameters. You can use this to create swing rhythms, for
instance.
Level (1-2)
-INF, -69.0 to 0.0dB. This sets the volume level of the delay. Note that the overall
delay level is controlled by the Delays Level parameter.
Pan (1-2)
+/-100. This controls the stereo pan of the delay's output.
Feedback (1-2)
-INF, -69.0 to 0.0dB. This adjusts the amount of feedback for the delay line.
On (1-2)
On, Off. This allows you to mute the output of the delay.
Invert Phase (1-2)
On, Off. This inverts the phase of the delay's output. You can use this to create
different tonal qualities as the delays overlap with each other, or with the main
signal.
622
Reverbs
OASYS PCI