Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 423

Filters
Key Track
+/- 100. This adjusts the filter cutoff in response to incoming MIDI notes, centered
on E4, as shown below. Note that you can also modulate any parameter using the
"Key Tracking" modulators in the Mod Palette.
Key Tracking
Env Trigger
List of Modulation Sources. This sets the modulation source for triggering the
envelope. Note Gate + Sustain works well, for instance. For a complete list, please
see "Modulation Sources" on page 2.
Nonlinearity
Soft, Hard, Saturate. This controls the model of the VCA output nonlinearity.
Output
Volume
+12 to -123.9dB, -INF. This is the output volume for the effect.
This control has extra smoothing on the DSP, to ensure zipper-free modulation. If
you want to modulate the volume instantaneously via velocity, use the Vel Sens
control instead.
IMPORTANT: The output volume provides up to 12dB in gain, so that you can get
your signals as hot as possible. However, if filter resonance is high, settings above
0dB may cause clipping.
OASYS PCI
Key Track amount
+100
0
-100
A0 E4 C8
MIDI Note
+100
+50
0
-50
-100
Mini Filter
415