Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 31

Analog Synths
Glide
0-100. This sets the glide amount (also known as portamento) for the oscillator,
which makes the pitch slide smoothly between notes. At 0, Glide is completely off.
At 100, notes will take a long time to glide to the new pitch.
Note that the effects of glide will also vary depending on the Patch's voice
allocation setting, in the Program Edit window. Poly Retrig, Poly Reuse, Mono
Legato, and Unison modes are generally the most suitable for use with Glide, but
you may find that you like other settings as well.
Amplitude
Env. Select
AR, Filt. Env. This selects which envelope is used to control the amplitude, or
output volume, of the synth.
AR. The AR envelope, controlled by the Attack and Release knobs in this section of
the Control Panel, will control the amplitude.
Filt. Env. The Filter Envelope will control the amplitude, as well as the filter cutoff.
Attack
0-100. This sets the attack time of the AR envelope–the time that it takes from the
moment that the key is pressed until the envelope reaches its peak.
Release
0-100. This sets the release time of the AR envelope–the time that it takes from the
moment that the key is released until the envelope falls to zero.
AR Envelope
OASYS PCI
Attack time Sustain while
holding note
Analog Bass-Lead
Release time
23