Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 257

Chorus
Taps 2-6
Each of Taps 2-6 has its own LFO, running at a preset phase offset from Tap 1's LFO,
as shown below:
Phase
Delay
0.0-670.0ms. This sets the delay time for the tap, in milliseconds.
Depth
0-100. This controls the depth of LFO pitch modulation for the tap.
Level
0-100. This sets the output volume level for the tap.
Mod Amt
+/-100. This sets the amount by which the mod source affects the output level of
each individual tap. All of the taps use the mod source selected for Tap 1, as
described above. You can use the level modulation to smoothly crossfade between
(for instance) a 4-phase chorus and a two-tap delay.
Tap 1 Feedback
Feedback
+/-100. This sets the delay feedback for tap 1.
Feedback Mod
List of Modulation Sources. This sets the modulation source for controlling tap 1's
delay feedback. For a complete list, please see "Modulation Sources" on page 2.
Mod Amt
+/-100. This sets the amount by which the mod source affects tap 1's delay
feedback.
Panning
Panning Preset
a-d. This controls the panning of the six taps, offering various combinations of
stereo images. Each entry shows the relative panning of the taps, from left to right.
OASYS PCI
Tap 1 2
0° 180°
3 4
60° 240°
6-Tap Chorus
5 6
120° 300°
249