Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 47

Analog Synths
Mod Controller
List of Modulation Sources. This sets the source for controlling the amount of the
Mod Mix sent to the filter and oscillators. For a complete list, please see
"Modulation Sources" on page 2.
The Mod Mix determines the modulation amount. Oscillator modulation is enabled
by the Osc. Mod. button (see page 39), and filter modulation is enabled by the Filter
Modulation button (see page 40).
Mod Depth
0-100. This sets the amount by which the mod source affects the LFO amount.
Oscillator 1
Range
32', 16', 8', 4', 2'. This sets the coarse tuning of the oscillator over a four-octave
range.
Waveform
Triangle, Tri + Saw, Sawtooth, Square, Pulse 30%, Pulse 10%. This selects the
shape of the oscillator.
Osc. Mod.
Osc. Mod.
On, Off. This enables and disables oscillator 1 & 2 pitch modulation by the Mod
Controller and Mod Mix, as set in the Controllers section. Oscillator 3 is not
affected.
Oscillator 2
Range
32', 16', 8', 4', 2'. This sets the coarse tuning of the oscillator over a four-octave
range.
Waveform
Triangle, Tri + Saw, Sawtooth, Square, Pulse 30%, Pulse 10%. This selects the
shape of the oscillator.
Oscillator 3
Range
Lo, 32', 16', 8', 4', 2'. This sets the coarse tuning of the oscillator over a four-octave
range. Generally, you should select Lo when using oscillator 3 as an LFO.
OASYS PCI
Mini Synth
39