St Midi Dly - Korg Soundlink DRS OASYS PCI Patches & Effects Manual

Hide thumbs Also See for Soundlink DRS OASYS PCI:
Table of Contents

Advertisement

Delay

St Midi Dly

This is a true stereo delay with smooth, clickless MIDI clock synchronization. You
can also modulate the delay times smoothly via MIDI controllers, The right and left
channels each have their own level, pan, feedback amount, and high and low
filters.
Input
Level
-INF, -69.0 to 0.0dB. This sets the input level for the effect. It does not affect the dry
signal.
Delay Control
Delay Mode
Delay Time, Manual Tempo, MIDI Tempo. This determines how the delay times
will be controlled.
Delay Time. The delay times will be controlled by the tap's Delay Time knobs.
Manual Tempo. The delay times will be controlled by the combination of the
Manual Tempo knob and each tap's Note Value menu.
MIDI Tempo. The delay times will be controlled by the combination of received
MIDI clocks and each tap's Note Value menu.
Manual Tempo
40-240bpm. This sets the tempo for the delays, when the Delay Mode is set to
Manual Tempo.
Smoothing
0.0-100.0. This determines how long it takes for the delay times to respond to tempo
changes and MIDI controller modulation. 50.0 works well in most cases. Lower
settings will mean that the delay times will change very quickly, but may also cause
clicking. Higher settings will make the delays slide very slowly to their new values,
which can create interesting special effects.
Left Delay and Right Delay
The left and right delays have the same features.
Delay Time
0.0-8000.0ms. This sets the delay time for the tap, in milliseconds.
This parameter only applies when the Delay Mode is set to Delay Time. When
Delay Mode is set to Tempo, this has no effect.
OASYS PCI
St Midi Dly
347

Advertisement

Table of Contents
loading

Table of Contents