Korg Soundlink DRS OASYS PCI Patches & Effects Manual page 144

Krypton 2p
Amplifier
Envelope
These parameters control an attack-decay envelope dedicated to the output
volume.
Attack
0-100. This sets the attack time of the envelope–the time that it takes from the
moment that the key is pressed until the envelope reaches its peak.
Decay
0-100. This sets the decay time of the envelope–the time that it takes from the
moment that the peak of the envelope is reached until the envelope falls to zero.
AR Envelope
Volume
+12 to -123.9dB, -INF. This is the output volume for the Patch.
IMPORTANT: The output volume provides up to 12dB in gain, so that you can get
your signals as hot as possible. However, if filter resonance is high, settings above
0dB may cause clipping.
This control has extra smoothing on the DSP, to ensure zipper-free modulation. If
you want to modulate the volume instantaneously via velocity, use the Vel Sens
control instead.
Vel Sens (Velocity Sensitivity)
0-100. This sets the sensitivity of output volume to velocity. A velocity of 127 will
always result in the maximum output level, as set by the Volume control; increasing
the Vel Sens will decrease the output volume for low velocities.
136
Attack time Decay time
PCM
OASYS PCI