Install The Option On A Ga500 Drive; Receiving - YASKAWA SI-N3/V Technical Manual

*1 Before you install the option on an L1000A, U1000 or Z1000U drive, make sure that the option software version is PRG: 1112 or
later.
*2 Before you install the option on a GA500, GA700, GA800, or FP605 drive, make sure that the option software version is PRG: 1115
or later.
Note:
• Refer to the option package labeling in the field designated "PRG (four digit number)" or the option labeling in the field to identify the
option software version.
• For Yaskawa customers in the North or South America region:
If your product is not listed in
provides a list of option manuals by product, and a direct link to download a PDF of the manual.
Scan QR code Or refer to:
http://www.yaskawa.com/optionlookup
◆

Install the Option on a GA500 Drive

An option card mounting kit is necessary to install the option on a GA500 drive. The option card mounting kit
model is: JOHB-GA50. This kit is sold separately.
Refer to the option card mounting kit manual for more information about installation.
A - Option card mounting kit components (sold
separately)
B - Option
3

Receiving

After you receive the option package:
• Make sure that there is no damage to the option and no parts are missing.
The Yaskawa warranty does not include damage from shipping. If there is damage to the option or other parts,
contact the shipping company immediately.
NOTICE
Damage to Equipment. Do not use damaged parts to connect the drive and the option. Failure to comply
could damage the drive and option.
YASKAWA SIEP C730600 84G DeviceNet Technical Manual
Drive
*2
GA700
*2
GA800
*2
FP605
Table 2.1, refer to the web page below to confirm this manual is correct for your product. The web page
Figure 2.2 Option Card Mounting Kit (JOHB-GA50)
C - Drive front cover
3 Receiving
Model
All
All
All
9