Flash Memory Operations; Prompt Mode Configuration - 3Com WX3000 Series Operation Manual

To do...
Enter system view
Execute the specified
batch file
For deleted files whose names are the same, only the latest deleted file is kept in the recycle bin
and can be restored.
The files which are deleted by the delete command without the /unreserved keyword are actually
moved to the recycle bin and thus still take storage space. You can clear the recycle bin by using
the reset recycle-bin command.
The dir /all command displays the files in the recycle bin in square brackets.
If the configuration files are deleted, the device adopts the null configuration when it starts up next
time.

Flash Memory Operations

Follow these steps to perform operations on the flash memory in user view:
Format the flash memory
Restore space on the flash memory
The format operation leads to the loss of all files, including the configuration files, on the flash memory
and is irretrievable.

Prompt Mode Configuration

You can set the prompt mode of the current file system to alert or quiet. In alert mode, the file system
will give a prompt for confirmation if you execute a command which may cause data loss, for example,
deleting or overwriting a file. In quiet mode, such prompt will not be displayed.
Use the command...
system-view
execute filename
To do... Use the command...
format device
fixdisk device
1-3
Remarks
—
Optional
This command should be
executed in system view.
Remarks
Required
Required