Set Accounting {Dot1X | Mac | Web | Last-Resort - 3Com Wireless LAN Switch WX1200 Command Reference Manual

set accounting
{dot1x | mac | web |
last-resort}
Sets up accounting services for specified wireless users with network
access, and defines the accounting records and where they are sent.
Syntax —

set accounting {dot1x | mac | web | last-resort}

{ssid ssid-name | wired} {user-glob | mac-addr-glob}
{start-stop | stop-only} method1 [method2] [method3]
[method4]
— Users with network access through the WX switch who are
dot1x
authenticated by 802.1X.
— Users with network access through the WX switch who are
mac
authenticated by MAC authentication
web — Users with network access through the WX switch who are
authenticated by WebAAA
ssid ssid-name
To apply the rule to all SSIDs, type any.
wired — Applies this accounting rule specifically to users who are
authenticated on a wired authentication port.
user-glob — Single user or set of users with administrative access or
network access.
Specify a username, use the double-asterisk wildcard character (**) to
specify all usernames, or use the single-asterisk wildcard character (*)
to specify a set of usernames up to or following the first delimiter
character — either an at sign (@) or a period (.). (For details, see "User
Globs" on page 26.)
This option does not apply if mac or last-resort is specified. For mac,
specify a mac-addr-glob. (See "MAC Address Globs" on page 27.)
mac-addr-glob — A single user or set of users with access via a MAC
address. Specify a MAC address, or use the wildcard (*) character to
specify a set of MAC addresses. (For details, see "MAC Address
Globs" on page 27.)
This option applies only when mac is specified.
start-stop — Sends accounting records at the start and end of a
network session.
stop-only — Sends accounting records only at the end of a network
session.
set accounting {dot1x | mac | web | last-resort}
— SSID name to which this accounting rule applies.
227